pneumatic feeders

In order to satisfy all requirements, we offer two automatic systems of tool feeders. The first is an innovative feeder; it provides a definite solution to many problems of the forward-feed process of the strip, it has been created to be used with extreme simplicity and is perfectly suitable for any kind of press or equipment.

No setting needs to be done to the tool and it works by using the advancement of the stamping die.

Simulating a manual forward-feed movement, this device enables a safe and practical feeding on any kind of tool or shearing device functioning by pitch. The second is the traditional pushing feeder: advancement of the die is not required for this feeder to be mounted, in fact, it has a progression switch.

This feeder is very useful if one wishes to minimize production wastage, in fact, narrower strips can be used on this feeder. This feeder requires the die to be set.

Technical features:
Pneumatic compressed-air feeder (5/6bar)
Speed 250 beats per minute
Max pitch 120mm
Width: up to 65 mm
Thickness: as from 0.1 up to 1.5 mm
Dimensions:
240x200
h 200 mm.