This machine is very suitable for cleaning flat or slightly embossed surfaces.

With the help of an operator who has to load and unload the pieces, it can easily brush a large amount of production. It has two workstations, one of which is dedicated to loading and unloading the machine can work continuously. It's calculated that the volume of overall production of this machine corresponds to that of 8 operators.

The pieces are loaded on rotating discs inside mask parts that can be either provided by TEKA or made by the customer itself. The benefits aren't just merely represented by the volume of production but also the by quality of brushing.

In facts ABF brush more effectively and deeply than it can be done by an operator manually.

The pieces are driven against the brush by a hydraulic piston controlled by a simple pressure potentiometer. The phase of work involves the dual rotation of disc and brush.

It's also possible to reverse and control both directions of rotation and single working times.

The use of this machine fix the so-called defect 'tail' or 'leaks' which are often left from the normal manual brush. This system makes cleaning extremely simple even with most difficult materials like silver or stainless steel. The machine is designed for a possible connection to a vacuum system that can also be provided by TEKA on request.

Technical Features:

power supply: 380V 50/60 Hz

pneumatic: 6 bars (50 Lt/min)

dimensions: 80x100x150 cm.

weight: 300 Kg.

control panel: LCD touch screen display